Hexagon box template with a lid SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two loose pieces. Each is six walls in a strip with a hexagon hinged below one of them: glue the strip into a ring, then the five tabs under the hexagon. Cut 210 mm wide, the box is 57 mm across its flat sides and 41 mm deep.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.63 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 68: 2 outer edges and 66 cut-outs |
| Cut length | 984 mm at this size |
| Narrowest part | 0.5 mm at this size |
| Nodes | 332 curve and line segments |
Measured from the file. PNG: 2,000 × 1,360 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.13 mm | 250 mm | 140 | Too fine for most machines |
| 2 × 1.33 in (51 × 34 mm) | 0.25 mm | 500 mm | 35 | Too fine for most machines |
| 3 × 2 in (76 × 51 mm) | 0.38 mm | 750 mm | 15 | Too fine for most machines |
| 4 × 2.67 in (102 × 68 mm) | 0.51 mm | 1,000 mm | 8 | Fine detail: vinyl and paper only, weed with care |
| 6 × 4 in (152 × 102 mm) | 0.76 mm | 1,500 mm | 2 | Fine detail: vinyl and paper only, weed with care |
| 8 × 5.34 in (203 × 136 mm) | 1 mm | 1,999 mm | 2 | Vinyl, card and thin sheet |
| 12 × 8 in (305 × 203 mm) | 1.5 mm | 2,999 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More box template SVG files
-
Round box template with a lid Solid · 4 pieces
-
Heart box template with a lid Solid · 4 pieces
-
Cake slice box template Solid · one piece
-
Cube box template to print and cut by hand Outline · 37 pieces
-
Oblong box template with coloured panels Layered · 5 pieces
-
Square box template with a lid Solid · 2 pieces
-
Rectangle box template with a tuck lid Solid · one piece
-
Cube box template with two tuck ends Solid · one piece
← Matchbox template with a sliding drawer All 11 box templates Round box template with a lid →