Free book SVG

Open book with stars SVG

Open book with stars, as a solid black shape
Open book with stars. The preview is the SVG file itself.

An open book with three stars rising from its pages on a curling trail, each bigger than the last. For story time, fairy tales and anything that begins once upon a time.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size79 × 100 mm (3.1 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,267 mm at this size
Narrowest part2 mm at this size
Nodes221 curve and line segments

Measured from the file. PNG: 1,590 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.79 × 1 in (20 × 25 mm)0.51 mm322 mm120Fine detail: vinyl and paper only, weed with care
1.57 × 2 in (40 × 51 mm)1 mm644 mm30Vinyl, card and thin sheet
2.36 × 3 in (60 × 76 mm)1.5 mm965 mm12Vinyl, card and thin sheet
3.15 × 4 in (80 × 102 mm)2 mm1,287 mm6Vinyl, card and thin sheet
4.72 × 6 in (120 × 152 mm)3 mm1,931 mm2Any material, including 3 mm wood and acrylic
6.3 × 8 in (160 × 203 mm)4.1 mm2,575 mm1Any material, including 3 mm wood and acrylic
9.44 × 12 in (240 × 305 mm)6.1 mm3,862 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More book SVG files

← Bookworm in an open book All 13 books Open book →