Bible with a cross SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A closed Bible from the front with a cross cut through the cover and a ribbon marker at the foot. For baptism and confirmation cards and church newsletters.
What is in the file
| Size | 68 × 100 mm (2.66 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 815 mm at this size |
| Narrowest part | 3 mm at this size |
| Nodes | 37 curve and line segments |
Measured from the file. PNG: 1,377 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.68 × 1 in (17 × 25 mm) | 0.76 mm | 207 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 1.35 × 2 in (34 × 51 mm) | 1.5 mm | 414 mm | 35 | Vinyl, card and thin sheet |
| 2.03 × 3 in (52 × 76 mm) | 2.3 mm | 621 mm | 15 | Vinyl, card and thin sheet |
| 2.7 × 4 in (69 × 102 mm) | 3 mm | 828 mm | 8 | Any material, including 3 mm wood and acrylic |
| 4.06 × 6 in (103 × 152 mm) | 4.6 mm | 1,242 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.41 × 8 in (137 × 203 mm) | 6.1 mm | 1,656 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.11 × 12 in (206 × 305 mm) | 9.1 mm | 2,484 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.