Free Birthday Crew SVG

Birthday Crew with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Birthday Crew with a drop shadow, in layered colours
Birthday Crew with a drop shadow. The preview is the SVG file itself.

“Birthday Crew” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 67 mm (3.94 × 2.63 in), scales to any size
Pieces6 separate pieces
Outlines to cut20: 6 outer edges and 14 cut-outs
Cut length1,578 mm at this size
Narrowest part3.5 mm at this size
Nodes500 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,360 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.89 mm401 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.33 in (51 × 34 mm)1.8 mm802 mm35Vinyl, card and thin sheet
3 × 2 in (76 × 51 mm)2.7 mm1,202 mm15Vinyl, card and thin sheet
4 × 2.67 in (102 × 68 mm)3.6 mm1,603 mm8Any material, including 3 mm wood and acrylic
6 × 4 in (152 × 102 mm)5.3 mm2,405 mm2Any material, including 3 mm wood and acrylic
8 × 5.34 in (203 × 136 mm)7.1 mm3,206 mm2Any material, including 3 mm wood and acrylic
12 × 8 in (305 × 203 mm)11 mm4,810 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Birthday Crew SVG files

← Birthday Crew stencil plate All 13 Birthday Crew designs Birthday Crew with a birthday cake →