Free birthday cake SVG

Split birthday cake for a name SVG

Split birthday cake for a name, as a solid black shape — Split birthday cake for a name. The preview is the SVG file itself.

A cake pulled apart with a clear band for a name between the icing and the base. Two pieces: icing with three candles above, the beaded base on its plate below.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	96 × 100 mm (3.79 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	17: 2 outer edges and 15 cut-outs
Cut length	942 mm at this size
Narrowest part	1.9 mm at this size
Nodes	209 curve and line segments

Measured from the file. PNG: 1,929 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.96 × 1 in (24 × 25 mm)	0.48 mm	239 mm	100	Too fine for most machines
1.93 × 2 in (49 × 51 mm)	0.97 mm	479 mm	25	Fine detail: vinyl and paper only, weed with care
2.89 × 3 in (73 × 76 mm)	1.4 mm	718 mm	9	Vinyl, card and thin sheet
3.85 × 4 in (98 × 102 mm)	1.9 mm	957 mm	6	Vinyl, card and thin sheet
5.78 × 6 in (147 × 152 mm)	2.9 mm	1,436 mm	2	Vinyl, card and thin sheet
7.7 × 8 in (196 × 203 mm)	3.9 mm	1,914 mm	1	Any material, including 3 mm wood and acrylic
11.56 × 12 in (294 × 305 mm)	5.8 mm	2,871 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More birthday cake SVG files

← Bundt cake with icing All 16 birthday cakes Layered birthday cake in four colours →