Free birthday cake SVG

Three-tier birthday cake with a star SVG

Three-tier birthday cake with a star. The preview is the SVG file itself.

Three tiers that step in towards the top, scalloped icing on each, and a five-point star standing where the candles would be. For a big birthday.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 96 mm (3.94 × 3.79 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	824 mm at this size
Narrowest part	2.9 mm at this size
Nodes	116 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,929 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.96 in (25 × 24 mm)	0.74 mm	209 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.93 in (51 × 49 mm)	1.5 mm	419 mm	25	Vinyl, card and thin sheet
3 × 2.89 in (76 × 73 mm)	2.2 mm	628 mm	9	Vinyl, card and thin sheet
4 × 3.85 in (102 × 98 mm)	2.9 mm	837 mm	6	Vinyl, card and thin sheet
6 × 5.78 in (152 × 147 mm)	4.4 mm	1,256 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.7 in (203 × 196 mm)	5.9 mm	1,674 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.56 in (305 × 294 mm)	8.8 mm	2,512 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More birthday cake SVG files

← Two-tier birthday cake All 16 birthday cakes Birthday cake on a stand →