Free Big Sister Again SVG

Big Sister Again stencil plate SVG

Big Sister Again stencil plate, as a solid black shape
Big Sister Again stencil plate. The preview is the SVG file itself.

A rounded plate with “BIG SISTER AGAIN” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 67 mm (3.94 × 2.63 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length1,390 mm at this size
Narrowest part1.3 mm at this size
Nodes322 curve and line segments

Measured from the file. PNG: 2,000 × 1,362 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.33 mm353 mm140Too fine for most machines
2 × 1.34 in (51 × 34 mm)0.66 mm706 mm35Fine detail: vinyl and paper only, weed with care
3 × 2 in (76 × 51 mm)0.99 mm1,059 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.67 in (102 × 68 mm)1.3 mm1,412 mm8Vinyl, card and thin sheet
6 × 4.01 in (152 × 102 mm)2 mm2,118 mm2Vinyl, card and thin sheet
8 × 5.34 in (203 × 136 mm)2.6 mm2,824 mm2Vinyl, card and thin sheet
12 × 8.02 in (305 × 204 mm)4 mm4,237 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Big Sister Again SVG files

← Big Sister Again outline lettering All 12 Big Sister Again designs Big Sister Again with a drop shadow →