Free Big Sister Again SVG

Big Sister Again in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Big Sister Again in Lilita One, as a solid black shape
Big Sister Again in Lilita One. The preview is the SVG file itself.

“Big Sister Again” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 50 mm (3.94 × 1.95 in), scales to any size
Pieces17 separate pieces
Outlines to cut24: 17 outer edges and 7 cut-outs
Cut length839 mm at this size
Narrowest part2.6 mm at this size
Nodes286 curve and line segments

Measured from the file. PNG: 2,000 × 1,031 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.66 mm213 mm170Fine detail: vinyl and paper only, weed with care
2 × 0.99 in (51 × 25 mm)1.3 mm426 mm50Vinyl, card and thin sheet
3 × 1.49 in (76 × 38 mm)2 mm639 mm21Vinyl, card and thin sheet
4 × 1.98 in (102 × 50 mm)2.6 mm852 mm10Vinyl, card and thin sheet
6 × 2.98 in (152 × 76 mm)4 mm1,279 mm3Any material, including 3 mm wood and acrylic
8 × 3.97 in (203 × 101 mm)5.3 mm1,705 mm2Any material, including 3 mm wood and acrylic
12 × 5.95 in (305 × 151 mm)7.9 mm2,557 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Big Sister Again SVG files

← Big Sister Again in Kaushan Script All 13 Big Sister Again designs Big Sister Again in Alfa Slab One →