Free Big Sister Again SVG

Big Sister Again in Amatic SC SVG

Big Sister Again in Amatic SC, as a solid black shape
Big Sister Again in Amatic SC. The preview is the SVG file itself.

“Big Sister Again” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 72 mm (3.94 × 2.83 in), scales to any size
Pieces14 separate pieces
Outlines to cut19: 14 outer edges and 5 cut-outs
Cut length1,293 mm at this size
Narrowest part1.9 mm at this size
Nodes507 curve and line segments

Measured from the file. PNG: 2,000 × 1,462 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.48 mm328 mm130Too fine for most machines
2 × 1.44 in (51 × 37 mm)0.97 mm657 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.16 in (76 × 55 mm)1.4 mm985 mm15Vinyl, card and thin sheet
4 × 2.88 in (102 × 73 mm)1.9 mm1,314 mm6Vinyl, card and thin sheet
6 × 4.32 in (152 × 110 mm)2.9 mm1,971 mm2Vinyl, card and thin sheet
8 × 5.76 in (203 × 146 mm)3.9 mm2,627 mm2Any material, including 3 mm wood and acrylic
12 × 8.64 in (305 × 219 mm)5.8 mm3,941 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Big Sister Again SVG files

← Big Sister Again in Alfa Slab One All 12 Big Sister Again designs Big Sister Again in block capitals →