Free bench SVG

Memorial park bench with a blank plaque SVG

Memorial park bench with a blank plaque, as a solid black shape
Memorial park bench with a blank plaque. The preview is the SVG file itself.

A park bench with a plain plate in the middle of its back, marked by four corner cuts and left empty for a name and dates. A pot of daisies stands on the ground beside it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 51 mm (3.94 × 2.02 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length989 mm at this size
Narrowest part2 mm at this size
Nodes192 curve and line segments

Measured from the file. PNG: 2,000 × 1,065 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.51 in (25 × 13 mm)0.51 mm251 mm170Fine detail: vinyl and paper only, weed with care
2 × 1.03 in (51 × 26 mm)1 mm502 mm45Vinyl, card and thin sheet
3 × 1.54 in (76 × 39 mm)1.5 mm754 mm21Vinyl, card and thin sheet
4 × 2.06 in (102 × 52 mm)2 mm1,005 mm10Vinyl, card and thin sheet
6 × 3.08 in (152 × 78 mm)3 mm1,507 mm3Any material, including 3 mm wood and acrylic
8 × 4.11 in (203 × 104 mm)4.1 mm2,010 mm2Any material, including 3 mm wood and acrylic
12 × 6.17 in (305 × 157 mm)6.1 mm3,014 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bench SVG files

← Park bench with a heart in the back All 16 benches Stone garden bench with a carved back →