Free bench SVG

Park bench with a heart in the back SVG

Park bench with a heart in the back, as a solid black shape
Park bench with a heart in the back. The preview is the SVG file itself.

A love seat: a high arched back with a heart cut from the middle and four upright slots each side, on the same iron ends as the park bench. For weddings and anniversaries.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 63 mm (3.94 × 2.48 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length993 mm at this size
Narrowest part3.6 mm at this size
Nodes142 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,288 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.91 mm252 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.26 in (51 × 32 mm)1.8 mm504 mm40Vinyl, card and thin sheet
3 × 1.89 in (76 × 48 mm)2.7 mm757 mm15Vinyl, card and thin sheet
4 × 2.52 in (102 × 64 mm)3.7 mm1,009 mm8Any material, including 3 mm wood and acrylic
6 × 3.78 in (152 × 96 mm)5.5 mm1,513 mm3Any material, including 3 mm wood and acrylic
8 × 5.04 in (203 × 128 mm)7.3 mm2,018 mm2Any material, including 3 mm wood and acrylic
12 × 7.56 in (305 × 192 mm)11 mm3,027 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More bench SVG files

← Park bench from the side All 16 benches Memorial park bench with a blank plaque →