Free beer mug SVG

Two beer mugs clinking SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Two beer mugs clinking, as a solid black shape
Two beer mugs clinking. The preview is the SVG file itself.

Two full mugs tip together in a toast, handles outwards, and their foam leaps up and meets in the middle. The foam is what joins them into one piece.

What is in the file

Size100 × 76 mm (3.94 × 2.99 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length880 mm at this size
Narrowest part2.1 mm at this size
Nodes119 curve and line segments
Also found asBeer mugs cheers SVG

Measured from the file. PNG: 2,000 × 1,537 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.76 in (25 × 19 mm)0.53 mm224 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.52 in (51 × 39 mm)1.1 mm447 mm35Vinyl, card and thin sheet
3 × 2.28 in (76 × 58 mm)1.6 mm671 mm12Vinyl, card and thin sheet
4 × 3.04 in (102 × 77 mm)2.1 mm894 mm6Vinyl, card and thin sheet
6 × 4.55 in (152 × 116 mm)3.2 mm1,341 mm2Any material, including 3 mm wood and acrylic
8 × 6.07 in (203 × 154 mm)4.3 mm1,788 mm1Any material, including 3 mm wood and acrylic
12 × 9.11 in (305 × 231 mm)6.4 mm2,682 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beer mug SVG files

← Beer mug monogram frame All 17 beer mugs Overflowing beer mug →