Free beer mug SVG

Beer can with a blank band SVG

Beer can with a blank band. The preview is the SVG file itself.

A plain drinks can seen from the side: a tapered top and bottom, a ring pull, a glint down one side and two cut lines that mark off a blank band for your own label.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	36 × 100 mm (1.42 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	464 mm at this size
Narrowest part	2 mm at this size
Nodes	46 curve and line segments

Measured from the file. PNG: 769 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.36 × 1 in (9 × 25 mm)	0.51 mm	118 mm	210	Fine detail: vinyl and paper only, weed with care
0.72 × 2 in (18 × 51 mm)	1 mm	236 mm	65	Vinyl, card and thin sheet
1.08 × 3 in (27 × 76 mm)	1.5 mm	354 mm	27	Vinyl, card and thin sheet
1.44 × 4 in (37 × 102 mm)	2 mm	471 mm	14	Vinyl, card and thin sheet
2.16 × 6 in (55 × 152 mm)	3 mm	707 mm	5	Any material, including 3 mm wood and acrylic
2.88 × 8 in (73 × 203 mm)	4.1 mm	943 mm	3	Any material, including 3 mm wood and acrylic
4.32 × 12 in (110 × 305 mm)	6.1 mm	1,414 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beer mug SVG files

← Beer mug and bottle All 17 beer mugs Beer bottle cap →