Free beagle SVG

Beagle paw print badge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Beagle paw print badge. The preview is the SVG file itself.

A paw print with the beagle face in place of the big pad and four toe pads above it. Five loose pieces set out in position, for car windows, kennel signs and the back of a hoodie.

What is in the file

Size	100 × 90 mm (3.94 × 3.54 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	13: 5 outer edges and 8 cut-outs
Cut length	830 mm at this size
Narrowest part	2 mm at this size
Nodes	206 curve and line segments

Measured from the file. PNG: 2,000 × 1,808 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.9 in (25 × 23 mm)	0.51 mm	211 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.8 in (51 × 46 mm)	1 mm	422 mm	30	Vinyl, card and thin sheet
3 × 2.7 in (76 × 69 mm)	1.5 mm	632 mm	12	Vinyl, card and thin sheet
4 × 3.6 in (102 × 91 mm)	2 mm	843 mm	6	Vinyl, card and thin sheet
6 × 5.4 in (152 × 137 mm)	3 mm	1,265 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.2 in (203 × 183 mm)	4.1 mm	1,687 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.8 in (305 × 274 mm)	6.1 mm	2,530 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beagle SVG files

← Beagle outline All 13 beagles Beagle monogram frame →