Free beagle SVG

Peeking beagle SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peeking beagle, as a solid black shape — Peeking beagle. The preview is the SVG file itself.

The top of a beagle face looking over a ledge, with the blaze between its eyes, the long ears hanging down either side and two paws hooked over the edge. For car windows, mugs and laptop lids.

What is in the file

Size	100 × 45 mm (3.94 × 1.76 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	580 mm at this size
Narrowest part	2.9 mm at this size
Nodes	114 curve and line segments

Measured from the file. PNG: 2,000 × 937 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.45 in (25 × 11 mm)	0.74 mm	147 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.89 in (51 × 23 mm)	1.5 mm	295 mm	55	Vinyl, card and thin sheet
3 × 1.34 in (76 × 34 mm)	2.2 mm	442 mm	21	Vinyl, card and thin sheet
4 × 1.79 in (102 × 45 mm)	2.9 mm	589 mm	12	Vinyl, card and thin sheet
6 × 2.68 in (152 × 68 mm)	4.4 mm	884 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.58 in (203 × 91 mm)	5.9 mm	1,179 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.36 in (305 × 136 mm)	8.8 mm	1,768 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beagle SVG files

← Beagle monogram frame All 13 beagles Layered beagle face in four colours →