Free beagle SVG

Beagle face SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Beagle face, as a solid black shape — Beagle face. The preview is the SVG file itself.

A beagle looking straight at you: wide ears hanging past the jaw, round shining eyes, a broad nose and the white blaze up the brow cut out as a window. The muzzle is marked by two curved slits.

What is in the file

Size	100 × 69 mm (3.94 × 2.71 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	823 mm at this size
Narrowest part	2.9 mm at this size
Nodes	203 curve and line segments

Measured from the file. PNG: 2,000 × 1,400 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 17 mm)	0.74 mm	209 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.38 in (51 × 35 mm)	1.5 mm	418 mm	35	Vinyl, card and thin sheet
3 × 2.06 in (76 × 52 mm)	2.2 mm	627 mm	15	Vinyl, card and thin sheet
4 × 2.75 in (102 × 70 mm)	2.9 mm	836 mm	8	Vinyl, card and thin sheet
6 × 4.13 in (152 × 105 mm)	4.4 mm	1,254 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.5 in (203 × 140 mm)	5.9 mm	1,672 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.26 in (305 × 210 mm)	8.8 mm	2,509 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beagle SVG files

← Beagle silhouette standing All 13 beagles Sitting beagle →