Adirondack beach chair from the side SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The same chair in profile: a long back leaning well over, a seat that slopes down to the rear, a flat arm on a bracketed front post and a rear leg running to the ground. Plain enough to cut very small.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 94 mm (3.94 × 3.69 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 4: 1 outer edge and 3 cut-outs |
| Cut length | 792 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 88 curve and line segments |
Measured from the file. PNG: 2,000 × 1,877 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.94 in (25 × 24 mm) | Over 1.5 mm | 201 mm | 100 | Vinyl, card and thin sheet |
| 2 × 1.87 in (51 × 48 mm) | Over 3 mm | 402 mm | 25 | Any material, including 3 mm wood and acrylic |
| 3 × 2.81 in (76 × 71 mm) | Over 4.6 mm | 604 mm | 12 | Any material, including 3 mm wood and acrylic |
| 4 × 3.74 in (102 × 95 mm) | Over 6.1 mm | 805 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 5.62 in (152 × 143 mm) | Over 9.1 mm | 1,207 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.49 in (203 × 190 mm) | Over 12 mm | 1,609 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 11.23 in (305 × 285 mm) | Over 18 mm | 2,414 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More beach chair SVG files
-
Beach lounge chair with a sun hat Solid · one piece -
Beach chair with a hat and a bag Solid · one piece -
Beach chair with a sandcastle Solid · one piece -
Two beach chairs with a table Solid · one piece -
Beach chair at sunset in a ring Solid · one piece -
Beach chair with a blank back for a name Solid · one piece -
Beach chair outline Outline · one piece -
Layered beach chair in four colours Layered · 12 pieces
← Adirondack chair from the front All 13 beach chairs Beach lounge chair with a sun hat →