Free beach chair SVG

Beach chair with a sandcastle SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Beach chair with a sandcastle, as a solid black shape
Beach chair with a sandcastle. The preview is the SVG file itself.

An Adirondack chair in profile beside a sandcastle of three towers with a flag, a doorway and battlements, with a bucket and a spade stuck in the sand. All on one flat strip.

What is in the file

Size100 × 63 mm (3.94 × 2.48 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length838 mm at this size
Narrowest part1.6 mm at this size
Nodes177 curve and line segments

Measured from the file. PNG: 2,000 × 1,287 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.63 in (25 × 16 mm)0.41 mm213 mm140Too fine for most machines
2 × 1.26 in (51 × 32 mm)0.81 mm426 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.89 in (76 × 48 mm)1.2 mm639 mm15Vinyl, card and thin sheet
4 × 2.52 in (102 × 64 mm)1.6 mm851 mm8Vinyl, card and thin sheet
6 × 3.77 in (152 × 96 mm)2.4 mm1,277 mm3Vinyl, card and thin sheet
8 × 5.03 in (203 × 128 mm)3.3 mm1,703 mm2Any material, including 3 mm wood and acrylic
12 × 7.55 in (305 × 192 mm)4.9 mm2,554 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More beach chair SVG files

← Beach chair with a hat and a bag All 13 beach chairs Two beach chairs with a table →