Free Be Happy SVG

Be Happy stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Be Happy stencil plate, as a solid black shape
Be Happy stencil plate. The preview is the SVG file itself.

A rounded plate with “BE HAPPY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size82 × 100 mm (3.21 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length1,302 mm at this size
Narrowest part1.3 mm at this size
Nodes208 curve and line segments

Measured from the file. PNG: 1,644 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.82 × 1 in (21 × 25 mm)0.33 mm331 mm120Too fine for most machines
1.63 × 2 in (41 × 51 mm)0.66 mm661 mm30Fine detail: vinyl and paper only, weed with care
2.44 × 3 in (62 × 76 mm)0.99 mm992 mm12Fine detail: vinyl and paper only, weed with care
3.26 × 4 in (83 × 102 mm)1.3 mm1,323 mm6Vinyl, card and thin sheet
4.89 × 6 in (124 × 152 mm)2 mm1,984 mm2Vinyl, card and thin sheet
6.52 × 8 in (166 × 203 mm)2.6 mm2,646 mm1Vinyl, card and thin sheet
9.78 × 12 in (248 × 305 mm)4 mm3,968 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Happy SVG files

← Be Happy outline lettering All 13 Be Happy designs Be Happy with a drop shadow →