Free Be Happy SVG

Be Happy in Amatic SC SVG

Be Happy in Amatic SC, as a solid black shape — Be Happy in Amatic SC. The preview is the SVG file itself.

“Be Happy” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	73 × 100 mm (2.87 × 3.94 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	12: 7 outer edges and 5 cut-outs
Cut length	942 mm at this size
Narrowest part	1.6 mm at this size
Nodes	295 curve and line segments

Measured from the file. PNG: 1,479 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.73 × 1 in (19 × 25 mm)	0.41 mm	239 mm	130	Too fine for most machines
1.46 × 2 in (37 × 51 mm)	0.81 mm	479 mm	35	Fine detail: vinyl and paper only, weed with care
2.19 × 3 in (56 × 76 mm)	1.2 mm	718 mm	15	Vinyl, card and thin sheet
2.92 × 4 in (74 × 102 mm)	1.6 mm	957 mm	6	Vinyl, card and thin sheet
4.37 × 6 in (111 × 152 mm)	2.4 mm	1,436 mm	2	Vinyl, card and thin sheet
5.83 × 8 in (148 × 203 mm)	3.3 mm	1,914 mm	2	Any material, including 3 mm wood and acrylic
8.75 × 12 in (222 × 305 mm)	4.9 mm	2,871 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Be Happy SVG files

← Be Happy in Alfa Slab One All 12 Be Happy designs Be Happy in block capitals →