Be Happy in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Be Happy” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 72 mm (3.94 × 2.83 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 13: 7 outer edges and 6 cut-outs |
| Cut length | 693 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 158 curve and line segments |
Measured from the file. PNG: 2,000 × 1,460 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.72 in (25 × 18 mm) | 0.97 mm | 176 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.44 in (51 × 37 mm) | 1.9 mm | 352 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.16 in (76 × 55 mm) | 2.9 mm | 528 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.88 in (102 × 73 mm) | 3.9 mm | 704 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.31 in (152 × 110 mm) | 5.8 mm | 1,056 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.75 in (203 × 146 mm) | 7.7 mm | 1,408 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.63 in (305 × 219 mm) | 12 mm | 2,112 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Be Happy SVG files
-
Be Happy in Alfa Slab One Solid · 7 pieces
-
Be Happy in Amatic SC Solid · 7 pieces
-
Be Happy in block capitals Solid · 7 pieces
-
Be Happy in script and capitals Solid · 7 pieces
-
Be Happy with hearts Solid · 12 pieces
-
Be Happy outline lettering Outline · 13 pieces
-
Be Happy stencil plate Solid · one piece
-
Be Happy with a drop shadow Layered · 5 pieces
← Be Happy in Kaushan Script All 13 Be Happy designs Be Happy in Alfa Slab One →