Baseball glove SVG
A fielder’s glove with four fingers, a laced web by the thumb, a pocket crease and a wrist strap. The finger slits are open at the top, so nothing falls out.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 98 × 100 mm (3.86 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 10: 1 outer edge and 9 cut-outs |
| Cut length | 875 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 102 curve and line segments |
Measured from the file. PNG: 1,962 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.98 × 1 in (25 × 25 mm) | 0.81 mm | 222 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.96 × 2 in (50 × 51 mm) | 1.6 mm | 445 mm | 25 | Vinyl, card and thin sheet |
| 2.94 × 3 in (75 × 76 mm) | 2.4 mm | 667 mm | 9 | Vinyl, card and thin sheet |
| 3.92 × 4 in (100 × 102 mm) | 3.3 mm | 889 mm | 4 | Any material, including 3 mm wood and acrylic |
| 5.88 × 6 in (149 × 152 mm) | 4.9 mm | 1,333 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.84 × 8 in (199 × 203 mm) | 6.5 mm | 1,778 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.76 × 12 in (299 × 305 mm) | 9.8 mm | 2,667 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Baseball cap 
Baseball field 
Baseball jersey 
Distressed baseball 
Split baseball for a name 
Baseball monogram frame 
Baseball with stitches 
Baseball outline 