Free baseball SVG

Baseball with stitches SVG

Baseball with stitches, as a solid black shape
Baseball with stitches. The preview is the SVG file itself.

A round ball with its two seams bowing in towards the middle, nine V-shaped stitches on each. The seams stop short of the edge, so the ball lifts as one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length1,040 mm at this size
Narrowest part1.9 mm at this size
Nodes172 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.48 mm264 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.97 mm528 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)1.4 mm792 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)1.9 mm1,057 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)2.9 mm1,585 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)3.9 mm2,113 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)5.8 mm3,170 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More baseball SVG files

← Baseball monogram frame All 22 baseballs Baseball outline →