Free Australia SVG

Australia in stripes SVG

Australia in stripes, as a solid black shape
Australia in stripes. The preview is the SVG file itself.

Australia drawn as bands 5 mm tall with 3 mm between them. Cut the bands in one colour and lay them over the solid shape of Australia in another; the bands are loose pieces.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 90 mm (3.94 × 3.54 in), scales to any size
Pieces16 separate pieces
Outlines to cut16 outlines
Cut length1,416 mm at this size
Narrowest part1.8 mm at this size
Nodes314 curve and line segments

Measured from the file. PNG: 2,000 × 1,808 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.46 mm360 mm110Too fine for most machines
2 × 1.8 in (51 × 46 mm)0.91 mm719 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.7 in (76 × 69 mm)1.4 mm1,079 mm12Vinyl, card and thin sheet
4 × 3.6 in (102 × 91 mm)1.8 mm1,439 mm6Vinyl, card and thin sheet
6 × 5.4 in (152 × 137 mm)2.7 mm2,158 mm2Vinyl, card and thin sheet
8 × 7.2 in (203 × 183 mm)3.7 mm2,877 mm1Any material, including 3 mm wood and acrylic
12 × 10.8 in (305 × 274 mm)5.5 mm4,316 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Australia SVG files

← Split Australia for a name All 10 Australia designs Layered Australia on an octagon →