Free Australia SVG

Australia with its name beneath SVG

Australia with its name beneath, as a solid black shape
Australia with its name beneath. The preview is the SVG file itself.

The solid shape of Australia with “AUSTRALIA” in narrow capitals under it. The letters of “Australia” are loose pieces, so use transfer tape to keep their spacing.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size89 × 100 mm (3.52 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut15: 11 outer edges and 4 cut-outs
Cut length733 mm at this size
Narrowest part2 mm at this size
Nodes543 curve and line segments

Measured from the file. PNG: 1,796 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.51 mm186 mm110Fine detail: vinyl and paper only, weed with care
1.79 × 2 in (45 × 51 mm)1 mm372 mm30Vinyl, card and thin sheet
2.68 × 3 in (68 × 76 mm)1.5 mm559 mm12Vinyl, card and thin sheet
3.58 × 4 in (91 × 102 mm)2 mm745 mm6Vinyl, card and thin sheet
5.36 × 6 in (136 × 152 mm)3 mm1,117 mm2Any material, including 3 mm wood and acrylic
7.15 × 8 in (182 × 203 mm)4.1 mm1,489 mm1Any material, including 3 mm wood and acrylic
10.73 × 12 in (272 × 305 mm)6.1 mm2,234 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Australia SVG files

← Australia cut from a heart All 10 Australia designs Split Australia for a name →