Free Australia SVG

Split Australia for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Split Australia for a name, as a solid black shape
Split Australia for a name. The preview is the SVG file itself.

Australia divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of Australia are loose pieces: line them up with transfer tape.

What is in the file

Size100 × 95 mm (3.94 × 3.73 in), scales to any size
Pieces3 separate pieces
Outlines to cut3 outlines
Cut length538 mm at this size
Narrowest part2 mm at this size
Nodes353 curve and line segments

Measured from the file. PNG: 2,000 × 1,900 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.95 in (25 × 24 mm)0.51 mm137 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.9 in (51 × 48 mm)1 mm273 mm25Vinyl, card and thin sheet
3 × 2.84 in (76 × 72 mm)1.5 mm410 mm12Vinyl, card and thin sheet
4 × 3.79 in (102 × 96 mm)2 mm547 mm6Vinyl, card and thin sheet
6 × 5.69 in (152 × 144 mm)3 mm820 mm2Any material, including 3 mm wood and acrylic
8 × 7.58 in (203 × 193 mm)4.1 mm1,093 mm1Any material, including 3 mm wood and acrylic
12 × 11.38 in (305 × 289 mm)6.1 mm1,640 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Australia SVG files

← Australia with its name beneath All 10 Australia designs Australia in stripes →