Free ATV SVG

Sport quad ATV with a number plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Sport quad ATV with a number plate, as a solid black shape
Sport quad ATV with a number plate. The preview is the SVG file itself.

A racing quad with no racks: a pointed nose fender, a swept tail with a grab bar, a blank number plate on the bars, a foot guard underneath and a slightly smaller front tyre.

What is in the file

Size100 × 61 mm (3.94 × 2.4 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length850 mm at this size
Narrowest part2.9 mm at this size
Nodes292 curve and line segments

Measured from the file. PNG: 2,000 × 1,248 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 15 mm)0.74 mm216 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.22 in (51 × 31 mm)1.5 mm432 mm40Vinyl, card and thin sheet
3 × 1.83 in (76 × 46 mm)2.2 mm648 mm18Vinyl, card and thin sheet
4 × 2.44 in (102 × 62 mm)2.9 mm864 mm8Vinyl, card and thin sheet
6 × 3.65 in (152 × 93 mm)4.4 mm1,295 mm3Any material, including 3 mm wood and acrylic
8 × 4.87 in (203 × 124 mm)5.9 mm1,727 mm2Any material, including 3 mm wood and acrylic
12 × 7.31 in (305 × 186 mm)8.8 mm2,591 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ATV SVG files

← Four wheeler ATV from the front All 13 ATVs Side by side ATV with a roll cage →