Free arrow SVG

Arrow with a feather tail SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Arrow with a feather tail, as a solid black shape
Arrow with a feather tail. The preview is the SVG file itself.

An arrow with a single broad feather for a tail, barbs cut into both edges, and a leaf-shaped point. Softer than the geometric arrows.

What is in the file

Size100 × 19 mm (3.94 × 0.75 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length347 mm at this size
Narrowest part3 mm at this size
Nodes48 curve and line segments

Measured from the file. PNG: 2,000 × 442 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.19 in (25 × 5 mm)0.76 mm88 mm310Fine detail: vinyl and paper only, weed with care
2 × 0.38 in (51 × 10 mm)1.5 mm176 mm105Vinyl, card and thin sheet
3 × 0.57 in (76 × 14 mm)2.3 mm264 mm45Vinyl, card and thin sheet
4 × 0.76 in (102 × 19 mm)3 mm353 mm24Any material, including 3 mm wood and acrylic
6 × 1.14 in (152 × 29 mm)4.6 mm529 mm9Any material, including 3 mm wood and acrylic
8 × 1.52 in (203 × 39 mm)6.1 mm705 mm7Any material, including 3 mm wood and acrylic
12 × 2.28 in (305 × 58 mm)9.1 mm1,058 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More arrow SVG files

← Boho arrow with bindings All 28 arrows Broken arrow →