Free arrow SVG

Cupid arrow with a heart tip SVG

Cupid arrow with a heart tip. The preview is the SVG file itself.

Cupid’s arrow, tilted upwards: the point is a heart and the tail has broad slit vanes. One welded piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 83 mm (3.94 × 3.27 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	441 mm at this size
Narrowest part	2 mm at this size
Nodes	47 curve and line segments

Measured from the file. PNG: 2,000 × 1,675 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.83 in (25 × 21 mm)	0.51 mm	112 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.66 in (51 × 42 mm)	1 mm	224 mm	30	Vinyl, card and thin sheet
3 × 2.49 in (76 × 63 mm)	1.5 mm	336 mm	12	Vinyl, card and thin sheet
4 × 3.32 in (102 × 84 mm)	2 mm	448 mm	6	Vinyl, card and thin sheet
6 × 4.99 in (152 × 127 mm)	3 mm	672 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.65 in (203 × 169 mm)	4.1 mm	896 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.97 in (305 × 253 mm)	6.1 mm	1,344 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More arrow SVG files

← Arrow with a heart All 28 arrows Bow and arrow →