Split apple for a name SVG
An apple cut across the middle with a clear band between the halves, where a name goes. It comes as two pieces: the top with stalk and leaf, and the bottom.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 92 × 100 mm (3.63 × 3.94 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 3: 2 outer edges and 1 cut-out |
| Cut length | 543 mm at this size |
| Narrowest part | 3.3 mm at this size |
| Nodes | 35 curve and line segments |
Measured from the file. PNG: 1,848 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.92 × 1 in (23 × 25 mm) | 0.84 mm | 138 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 1.84 × 2 in (47 × 51 mm) | 1.7 mm | 276 mm | 25 | Vinyl, card and thin sheet |
| 2.76 × 3 in (70 × 76 mm) | 2.5 mm | 414 mm | 12 | Vinyl, card and thin sheet |
| 3.68 × 4 in (94 × 102 mm) | 3.4 mm | 552 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.53 × 6 in (140 × 152 mm) | 5 mm | 828 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.37 × 8 in (187 × 203 mm) | 6.7 mm | 1,103 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.05 × 12 in (281 × 305 mm) | 10 mm | 1,655 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Apple half with seeds 
Apple core 
Apple with a worm 
Cute apple with a face 
Apple with a name banner 
Teacher apple on books 
Two apples 
Candy apple on a stick 