Free apple SVG

Apple with a name banner SVG

Apple with a name banner. The preview is the SVG file itself.

A ribbon with forked ends runs across the apple, set off by a cut line above and below, ready for a name. Made for teacher gifts, door signs and place cards.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 88 mm (3.94 × 3.48 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	701 mm at this size
Narrowest part	2.9 mm at this size
Nodes	50 curve and line segments

Measured from the file. PNG: 2,000 × 1,777 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.88 in (25 × 22 mm)	0.74 mm	178 mm	110	Fine detail: vinyl and paper only, weed with care
2 × 1.77 in (51 × 45 mm)	1.5 mm	356 mm	30	Vinyl, card and thin sheet
3 × 2.65 in (76 × 67 mm)	2.2 mm	534 mm	12	Vinyl, card and thin sheet
4 × 3.54 in (102 × 90 mm)	2.9 mm	712 mm	6	Vinyl, card and thin sheet
6 × 5.3 in (152 × 135 mm)	4.4 mm	1,068 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.07 in (203 × 180 mm)	5.9 mm	1,424 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.61 in (305 × 269 mm)	8.8 mm	2,137 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More apple SVG files

← Cute apple with a face All 15 apples Teacher apple on books →