Free angel SVG

Angel wings with space for a name SVG

Angel wings with space for a name, as a solid black shape
Angel wings with space for a name. The preview is the SVG file itself.

Two raised wings tipped outwards and set apart as loose pieces, leaving a clear space between them for a name, a date or a photo. Slide them in or out to fit.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length841 mm at this size
Narrowest part1.5 mm at this size
Nodes454 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 902 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.38 mm214 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.76 mm427 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.29 in (76 × 33 mm)1.1 mm641 mm24Vinyl, card and thin sheet
4 × 1.72 in (102 × 44 mm)1.5 mm854 mm12Vinyl, card and thin sheet
6 × 2.57 in (152 × 65 mm)2.3 mm1,282 mm4Vinyl, card and thin sheet
8 × 3.43 in (203 × 87 mm)3 mm1,709 mm3Any material, including 3 mm wood and acrylic
12 × 5.15 in (305 × 131 mm)4.6 mm2,563 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More angel SVG files

← Angel wings outline All 14 angels and angel wings Heart with angel wings and a halo →