Free angel SVG

Angel wings outline SVG

Angel wings outline, drawn as a line
Angel wings outline. The preview is the SVG file itself.

The raised pair as a line drawing, with the edge of every feather drawn and all the lines joined. For colouring, foil, engraving and single-line style cards.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 60 mm (3.94 × 2.34 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut39: 1 outer edge and 38 cut-outs
Cut length1,601 mm at this size
Narrowest part1.6 mm at this size
Nodes400 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,221 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.41 mm407 mm150Too fine for most machines
2 × 1.19 in (51 × 30 mm)0.81 mm813 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.78 in (76 × 45 mm)1.2 mm1,220 mm18Vinyl, card and thin sheet
4 × 2.38 in (102 × 60 mm)1.6 mm1,627 mm8Vinyl, card and thin sheet
6 × 3.57 in (152 × 91 mm)2.4 mm2,440 mm3Vinyl, card and thin sheet
8 × 4.76 in (203 × 121 mm)3.3 mm3,253 mm2Any material, including 3 mm wood and acrylic
12 × 7.14 in (305 × 181 mm)4.9 mm4,880 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More angel SVG files

← Simple angel wings All 14 angels and angel wings Angel wings with space for a name →