Free Aloha SVG

Aloha in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Aloha in Lilita One, as a solid black shape
Aloha in Lilita One. The preview is the SVG file itself.

“Aloha” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 30 mm (3.94 × 1.17 in), scales to any size
Pieces5 separate pieces
Outlines to cut8: 5 outer edges and 3 cut-outs
Cut length498 mm at this size
Narrowest part4.2 mm at this size
Nodes91 curve and line segments

Measured from the file. PNG: 2,000 × 646 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.3 in (25 × 8 mm)1.1 mm126 mm240Vinyl, card and thin sheet
2 × 0.59 in (51 × 15 mm)2.1 mm253 mm75Vinyl, card and thin sheet
3 × 0.89 in (76 × 23 mm)3.2 mm379 mm33Any material, including 3 mm wood and acrylic
4 × 1.18 in (102 × 30 mm)4.3 mm506 mm16Any material, including 3 mm wood and acrylic
6 × 1.78 in (152 × 45 mm)6.4 mm759 mm6Any material, including 3 mm wood and acrylic
8 × 2.37 in (203 × 60 mm)8.5 mm1,012 mm4Any material, including 3 mm wood and acrylic
12 × 3.55 in (305 × 90 mm)13 mm1,518 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Aloha SVG files

← Aloha in Kaushan Script All 13 Aloha designs Aloha in Alfa Slab One →