Free Aloha SVG

Aloha in block capitals SVG

Aloha in block capitals, as a solid black shape — Aloha in block capitals. The preview is the SVG file itself.

“ALOHA” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 37 mm (3.94 × 1.46 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	8: 5 outer edges and 3 cut-outs
Cut length	735 mm at this size
Narrowest part	4.7 mm at this size
Nodes	63 curve and line segments

Measured from the file. PNG: 2,000 × 792 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.37 in (25 × 9 mm)	1.2 mm	187 mm	210	Vinyl, card and thin sheet
2 × 0.74 in (51 × 19 mm)	2.4 mm	373 mm	60	Vinyl, card and thin sheet
3 × 1.12 in (76 × 28 mm)	3.6 mm	560 mm	27	Any material, including 3 mm wood and acrylic
4 × 1.49 in (102 × 38 mm)	4.8 mm	747 mm	14	Any material, including 3 mm wood and acrylic
6 × 2.23 in (152 × 57 mm)	7.2 mm	1,120 mm	5	Any material, including 3 mm wood and acrylic
8 × 2.98 in (203 × 76 mm)	9.6 mm	1,494 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.46 in (305 × 113 mm)	14 mm	2,240 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Aloha SVG files

← Aloha in Amatic SC All 12 Aloha designs Aloha with a swash underline →