Free Aloha SVG

Aloha outline lettering SVG

Aloha outline lettering, drawn as a line — Aloha outline lettering. The preview is the SVG file itself.

“Aloha” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 28 mm (3.94 × 1.09 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	16: 8 outer edges and 8 cut-outs
Cut length	905 mm at this size
Narrowest part	1.4 mm at this size
Nodes	174 curve and line segments

Measured from the file. PNG: 2,000 × 612 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.28 in (25 × 7 mm)	0.36 mm	230 mm	250	Too fine for most machines
2 × 0.56 in (51 × 14 mm)	0.71 mm	460 mm	80	Fine detail: vinyl and paper only, weed with care
3 × 0.83 in (76 × 21 mm)	1.1 mm	690 mm	33	Vinyl, card and thin sheet
4 × 1.11 in (102 × 28 mm)	1.4 mm	919 mm	18	Vinyl, card and thin sheet
6 × 1.67 in (152 × 42 mm)	2.1 mm	1,379 mm	6	Vinyl, card and thin sheet
8 × 2.22 in (203 × 56 mm)	2.8 mm	1,839 mm	5	Vinyl, card and thin sheet
12 × 3.34 in (305 × 85 mm)	4.3 mm	2,758 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Aloha SVG files

← Aloha with hearts All 12 Aloha designs Aloha stencil plate →