Free afro SVG

Afro puffs girl from the front SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Afro puffs girl from the front, as a solid black shape
Afro puffs girl from the front. The preview is the SVG file itself.

A girl with her hair parted in the middle and tied up in two round puffs, seen from the front with small hoops in her ears. The face is open and blank. Exactly mirrored.

What is in the file

Size89 × 100 mm (3.51 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length786 mm at this size
Narrowest part1 mm at this size
Nodes196 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,790 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.25 mm200 mm110Too fine for most machines
1.78 × 2 in (45 × 51 mm)0.51 mm399 mm30Fine detail: vinyl and paper only, weed with care
2.67 × 3 in (68 × 76 mm)0.76 mm599 mm12Fine detail: vinyl and paper only, weed with care
3.56 × 4 in (91 × 102 mm)1 mm799 mm6Vinyl, card and thin sheet
5.35 × 6 in (136 × 152 mm)1.5 mm1,198 mm2Vinyl, card and thin sheet
7.13 × 8 in (181 × 203 mm)2 mm1,597 mm1Vinyl, card and thin sheet
10.69 × 12 in (272 × 305 mm)3 mm2,396 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More afro SVG files

← Afro chic lady in sunglasses All 17 afro designs Afro puff on a teenager, side view →