Free afro SVG

Afro lady with long locs SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Afro lady with long locs, as a solid black shape
Afro lady with long locs. The preview is the SVG file itself.

A woman in profile, facing left, with locs: swept back over the crown and hanging behind the neck in separate, gently waving strands with rounded ends. Three partings are cut in the hair.

What is in the file

Size84 × 100 mm (3.32 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length981 mm at this size
Narrowest part1.9 mm at this size
Nodes246 curve and line segments

Measured from the file. PNG: 1,700 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.48 mm249 mm110Too fine for most machines
1.69 × 2 in (43 × 51 mm)0.97 mm498 mm30Fine detail: vinyl and paper only, weed with care
2.53 × 3 in (64 × 76 mm)1.4 mm748 mm12Vinyl, card and thin sheet
3.38 × 4 in (86 × 102 mm)1.9 mm997 mm6Vinyl, card and thin sheet
5.06 × 6 in (129 × 152 mm)2.9 mm1,495 mm2Vinyl, card and thin sheet
6.75 × 8 in (172 × 203 mm)3.9 mm1,993 mm1Any material, including 3 mm wood and acrylic
10.13 × 12 in (257 × 305 mm)5.8 mm2,990 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More afro SVG files

← Single braid of afro hair with a tie All 17 afro designs Afro lady with a flower in her hair →