Free A Thrill of Hope the Weary World Rejoices SVG

A Thrill of Hope in Lilita One SVG

A Thrill of Hope in Lilita One, as a solid black shape
A Thrill of Hope in Lilita One. The preview is the SVG file itself.

“A Thrill of Hope the Weary World Rejoices” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 43 mm (3.94 × 1.69 in), scales to any size
Pieces9 separate pieces
Outlines to cut16: 9 outer edges and 7 cut-outs
Cut length881 mm at this size
Narrowest part0.8 mm at this size
Nodes609 curve and line segments

Measured from the file. PNG: 2,000 × 900 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.2 mm224 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.41 mm448 mm55Too fine for most machines
3 × 1.28 in (76 × 33 mm)0.61 mm671 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.71 in (102 × 43 mm)0.81 mm895 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.57 in (152 × 65 mm)1.2 mm1,343 mm4Vinyl, card and thin sheet
8 × 3.42 in (203 × 87 mm)1.6 mm1,790 mm3Vinyl, card and thin sheet
12 × 5.14 in (305 × 130 mm)2.4 mm2,685 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More A Thrill of Hope the Weary World Rejoices SVG files

← A Thrill of Hope in Lobster All 10 A Thrill of Hope the Weary World Rejoices designs A Thrill of Hope in Amatic SC →