Winter cabin shadow box SVG
A log cabin among snowy pines with a moose passing on the ridge behind, a snowman by the path and the moon rising over the hills. 6 sheets of card, cut and stacked with a gap between each, make the picture. The files are free, and every part of the scene can be moved, swapped or resized below before you download.
6 sheets at 8 × 8 in, zipped, with a note on putting them together.
Free for personal and commercial use, no sign-up. What you can do with it.
The 6 sheets
Sheet 1 is the back and sheet 6 is the front. Each one is a single piece with the same frame round its edge, so they line up when stacked. The colours shown are the “Snow” set; cut them in any card you like.
| Sheet | What is on it | Narrowest part | Seen from the front |
|---|---|---|---|
| 1. Moon and snow | A whole sheet with holes for: 10 × Plain disc | over 2 mm | 35% |
| 2. Far ridge | A mountain range | over 2 mm | 5% |
| 3. Moose on the ridge | Rolling ground, with: Moose silhouette, Classic pine tree, Simple pine tree and Short wide pine tree | over 2 mm | 7% |
| 4. Cabin | Rolling ground, with: Log cabin house in the pines, Evergreen tree with even boughs and Classic pine tree | 1.3 mm | 16% |
| 5. Snowman and pines | A gentle slope, with: Snowman silhouette with a broom, Tall pine tree and Simple triangle Christmas tree | 1 mm | 12% |
| 6. Snow drift | A gentle slope, with: Simple pine tree and Bunch of grass | over 2 mm | 24% |
Measured from the files at 8 × 8 in. The narrowest part is the thinnest neck of card that holds anything on; sharp tips are not counted. “Seen from the front” is the share of the picture that sheet fills once the sheets in front of it are in place.
Will it cut at your size?
The download is 8 × 8 in. The scene maker above makes the same scene at any of these sizes; the thinnest part scales with it.
| Frame opening | Each sheet | Narrowest part | Depth needed | Fits a 12 × 12 in mat | Rule of thumb |
|---|---|---|---|---|---|
| 6 × 6 in | 152.4 × 152.4 mm | 0.8 mm | 20 mm | Yes | Fine detail: sharp blade, slow speed |
| 20 × 20 cm | 200 × 200 mm | 1 mm | 20 mm | Yes | Fine detail: sharp blade, slow speed |
| 8 × 8 in | 203.2 × 203.2 mm | 1 mm | 20 mm | Yes | Cuts easily |
| 23 × 23 cm | 230 × 230 mm | 1.1 mm | 20 mm | Yes | Cuts easily |
| 25 × 25 cm | 250 × 250 mm | 1.2 mm | 20 mm | Yes | Cuts easily |
Depth needed allows 3 mm of foam between sheets and 5 mm for the card itself and the backing.
Making this one
White card throughout and a warm light behind gives snow at dusk. The cabin’s logs and window panes are the finest parts; the pines are sturdy at any size.
- Cut all 6 sheets from 160 to 220 gsm card at the same size.
- Lay them out in order, sheet 1 at the back.
- Put strips of 3 mm foam tape round the border of sheet 1 and press sheet 2 onto it with the edges level. Carry on to sheet 6.
- Fit the stack into a deep frame with the front sheet against the glass. For a light box, run a strip of warm white LEDs round the inside of the frame behind the stack.
The zip includes these steps as a text file, each sheet as its own SVG and all 6 side by side in one SVG. More on paper, frames and lights is on the shadow box page.
The parts, on their own
Everything in the scene comes from the free SVG library, where each has its own page and file:
Questions
Can I make it snow?
Add small plain discs to the back sheet in the maker. Each becomes a hole, and with a light behind they read as falling snow.
Can I sell boxes I make with it?
Yes. Finished pieces are yours to sell. The files themselves may not be sold or shared; send people to this page. See the licence.
Wolf and moon 
Lighthouse beach 
Fairy garden 
Mountain lake 
Dinosaur valley 
Forest deer