Free house SVG

Log cabin house in the pines SVG

Log cabin house in the pines, as a solid black shape
Log cabin house in the pines. The preview is the SVG file itself.

A log cabin between two pine trees: round log ends up each corner, cut lines between the logs, a plank door, a window and smoke rising from the chimney.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 77 mm (3.94 × 3.04 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut25: 1 outer edge and 24 cut-outs
Cut length1,255 mm at this size
Narrowest part1.6 mm at this size
Nodes240 curve and line segments

Measured from the file. PNG: 2,000 × 1,560 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.77 in (25 × 20 mm)0.41 mm319 mm120Too fine for most machines
2 × 1.54 in (51 × 39 mm)0.81 mm638 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.31 in (76 × 59 mm)1.2 mm956 mm12Vinyl, card and thin sheet
4 × 3.08 in (102 × 78 mm)1.6 mm1,275 mm6Vinyl, card and thin sheet
6 × 4.63 in (152 × 118 mm)2.4 mm1,913 mm2Vinyl, card and thin sheet
8 × 6.17 in (203 × 157 mm)3.3 mm2,550 mm1Any material, including 3 mm wood and acrylic
12 × 9.25 in (305 × 235 mm)4.9 mm3,825 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More house SVG files

← Farmhouse with a porch All 17 houses Cute house with a scalloped roof →