Birch wood shadow box SVG
A birch wood in spring: pale trunks one behind another with the sun between them, a rabbit in the clearing, a squirrel by the toadstools and ferns and a hedgehog at the front. 5 sheets of card, cut and stacked with a gap between each, make the picture. The files are free, and every part of the scene can be moved, swapped or resized below before you download.
5 sheets at 8 × 10 in, zipped, with a note on putting them together.
Free for personal and commercial use, no sign-up. What you can do with it.
The 5 sheets
Sheet 1 is the back and sheet 5 is the front. Each one is a single piece with the same frame round its edge, so they line up when stacked. The colours shown are the “Forest green” set; cut them in any card you like. Cut sheet 4, “Squirrel and toadstools”, the slowest: at 1 mm it has the thinnest part in the scene, and sheet 5, “Ferns”, fills the most of the view, 31% of it.
| Sheet | What is on it | Narrowest part | Seen from the front |
|---|---|---|---|
| 1. Sun | A whole sheet with holes for: Plain disc | over 2 mm | 17% |
| 2. Far birches | Rolling ground, with: 2 × Birch tree silhouette and Birch tree in leaf | 1.6 mm | 12% |
| 3. Rabbit in the clearing | Rolling ground, with: Birch tree in leaf and Bunny silhouette sitting | over 2 mm | 16% |
| 4. Squirrel and toadstools | Rolling ground, with: Birch tree silhouette, Squirrel silhouette and Three mushrooms | 1 mm | 20% |
| 5. Ferns | A gentle slope, with: Ferns growing in a clump, Hedgehog silhouette and Fern silhouette | 1.1 mm | 31% |
Measured from the files at 8 × 10 in. The narrowest part is the thinnest neck of card that holds anything on; sharp tips are not counted. “Seen from the front” is the share of the picture that sheet fills once the sheets in front of it are in place.
Will it cut at your size?
The download is 8 × 10 in. The scene maker above makes the same scene at any of these sizes; the thinnest part scales with it.
| Frame opening | Each sheet | Narrowest part | Depth needed | Fits a 12 × 12 in mat | Rule of thumb |
|---|---|---|---|---|---|
| 8 × 10 in | 203.2 × 254 mm | 1 mm | 17 mm | Yes | Cuts easily |
Depth needed allows 3 mm of foam between sheets and 5 mm for the card itself and the backing.
Making this one
Birches are all hanging twigs, which is what makes them fine to cut. Make this at 8 by 10 inches or larger, and cut the three tree sheets at a slow speed with a new blade.
- Cut all 5 sheets from 160 to 220 gsm card at the same size.
- Lay them out in order, sheet 1 at the back.
- Put strips of 3 mm foam tape round the border of sheet 1 and press sheet 2 onto it with the edges level. Carry on to sheet 5.
- Fit the stack into a deep frame with the front sheet against the glass. For a light box, run a strip of warm white LEDs round the inside of the frame behind the stack.
The zip includes these steps as a text file, each sheet as its own SVG and all 5 side by side in one SVG. More on paper, frames and lights is on the shadow box page.
The parts, on their own
Everything in the scene comes from the free SVG library, where each has its own page and file:
Questions
Can the birches be white?
Each tree is one piece with the ground on its sheet, so the whole sheet takes one colour. Cut the three tree sheets in white and pale grey card and the fern sheet in green, and the wood reads as birches in mist.
Can I sell boxes I make with it?
Yes. Finished pieces are yours to sell. The files themselves may not be sold or shared; send people to this page. See the licence.
Campsite at night 
Canoe on the lake 
Harbour 
Breaching whale 
Dolphins at sunset 
Seahorse reef