Free zebra print SVG

Zebra print star SVG

Zebra print star. The preview is the SVG file itself.

A five-pointed star made of zebra stripes, with the print cut off cleanly at the star’s edges and points.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 99 mm (3.94 × 3.88 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	13 outlines
Cut length	1,265 mm at this size
Narrowest stripe	1.4 mm at this size
Nodes	418 curve and line segments

Measured from the file. PNG: 2,000 × 1,971 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest stripe	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.99 in (25 × 25 mm)	0.36 mm	321 mm	100	Too fine for most machines
2 × 1.97 in (51 × 50 mm)	0.71 mm	643 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.95 in (76 × 75 mm)	1.1 mm	964 mm	9	Vinyl, card and thin sheet
4 × 3.94 in (102 × 100 mm)	1.4 mm	1,285 mm	4	Vinyl, card and thin sheet
6 × 5.91 in (152 × 150 mm)	2.1 mm	1,928 mm	1	Vinyl, card and thin sheet
8 × 7.88 in (203 × 200 mm)	2.8 mm	2,570 mm	1	Vinyl, card and thin sheet
12 × 11.82 in (305 × 300 mm)	4.3 mm	3,856 mm	1	Any material, including 3 mm wood and acrylic

The narrowest stripe is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More zebra print SVG files

← Zebra print circle All 14 zebra prints Zebra print stencil panel →