Free world map SVG

World map in dots SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

World map in dots, as a solid black shape
World map in dots. The preview is the SVG file itself.

The continents drawn as rows of dots 1.8 mm across on a honeycomb grid, the style of airline route maps. Every dot is a loose piece, so cut it in vinyl and move it with transfer tape, or cut the dots as holes in a sheet for a lamp or a stencil.

What is in the file

Size100 × 57 mm (3.94 × 2.24 in), scales to any size
Pieces218 separate pieces
Outlines to cut218 outlines
Cut length1,630 mm at this size
Narrowest part2.3 mm at this size
Nodes436 curve and line segments

Measured from the file. PNG: 2,000 × 1,169 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 14 mm)0.58 mm414 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.14 in (51 × 29 mm)1.2 mm828 mm45Vinyl, card and thin sheet
3 × 1.7 in (76 × 43 mm)1.8 mm1,242 mm18Vinyl, card and thin sheet
4 × 2.27 in (102 × 58 mm)2.3 mm1,656 mm8Vinyl, card and thin sheet
6 × 3.41 in (152 × 87 mm)3.5 mm2,484 mm3Any material, including 3 mm wood and acrylic
8 × 4.54 in (203 × 115 mm)4.7 mm3,312 mm2Any material, including 3 mm wood and acrylic
12 × 6.82 in (305 × 173 mm)7 mm4,968 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More world map SVG files

← World map outline All 8 world maps World map in stripes →