Free wine glass SVG

Wine bottle outline SVG

Wine bottle outline, drawn as a line
Wine bottle outline. The preview is the SVG file itself.

A wine bottle as a line about 2.3 mm wide, with the label marked by two lines across the body and a band across the neck. For labels you letter by hand.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size27 × 100 mm (1.06 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length551 mm at this size
Narrowest part2.1 mm at this size
Nodes52 curve and line segments
SymmetryMirror

Measured from the file. PNG: 596 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.27 × 1 in (7 × 25 mm)0.53 mm140 mm250Fine detail: vinyl and paper only, weed with care
0.54 × 2 in (14 × 51 mm)1.1 mm280 mm80Vinyl, card and thin sheet
0.81 × 3 in (21 × 76 mm)1.6 mm420 mm36Vinyl, card and thin sheet
1.08 × 4 in (27 × 102 mm)2.1 mm560 mm18Vinyl, card and thin sheet
1.62 × 6 in (41 × 152 mm)3.2 mm840 mm6Any material, including 3 mm wood and acrylic
2.16 × 8 in (55 × 203 mm)4.3 mm1,120 mm5Any material, including 3 mm wood and acrylic
3.24 × 12 in (82 × 305 mm)6.4 mm1,679 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More wine glass SVG files

← Wine bottle with a blank label All 17 wine glasses Wine bottle and glass →