Free Wife Mom Boss SVG

Wife Mom Boss in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wife Mom Boss in Alfa Slab One, as a solid black shape
Wife Mom Boss in Alfa Slab One. The preview is the SVG file itself.

“Wife Mom Boss” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces12 separate pieces
Outlines to cut17: 12 outer edges and 5 cut-outs
Cut length1,260 mm at this size
Narrowest part2.7 mm at this size
Nodes245 curve and line segments

Measured from the file. PNG: 1,740 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.69 mm320 mm110Fine detail: vinyl and paper only, weed with care
1.73 × 2 in (44 × 51 mm)1.4 mm640 mm30Vinyl, card and thin sheet
2.6 × 3 in (66 × 76 mm)2.1 mm960 mm12Vinyl, card and thin sheet
3.46 × 4 in (88 × 102 mm)2.7 mm1,280 mm6Vinyl, card and thin sheet
5.19 × 6 in (132 × 152 mm)4.1 mm1,920 mm2Any material, including 3 mm wood and acrylic
6.92 × 8 in (176 × 203 mm)5.5 mm2,560 mm1Any material, including 3 mm wood and acrylic
10.38 × 12 in (264 × 305 mm)8.2 mm3,840 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Wife Mom Boss SVG files

← Wife Mom Boss in Lilita One All 13 Wife Mom Boss designs Wife Mom Boss in Amatic SC →