Free Wife Mom Boss SVG

Wife Mom Boss in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Wife Mom Boss in Lilita One, as a solid black shape
Wife Mom Boss in Lilita One. The preview is the SVG file itself.

“Wife Mom Boss” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size73 × 100 mm (2.88 × 3.94 in), scales to any size
Pieces12 separate pieces
Outlines to cut17: 12 outer edges and 5 cut-outs
Cut length1,073 mm at this size
Narrowest part3.8 mm at this size
Nodes241 curve and line segments

Measured from the file. PNG: 1,485 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.73 × 1 in (19 × 25 mm)0.97 mm273 mm130Fine detail: vinyl and paper only, weed with care
1.46 × 2 in (37 × 51 mm)1.9 mm545 mm35Vinyl, card and thin sheet
2.2 × 3 in (56 × 76 mm)2.9 mm818 mm15Vinyl, card and thin sheet
2.93 × 4 in (74 × 102 mm)3.9 mm1,090 mm6Any material, including 3 mm wood and acrylic
4.39 × 6 in (112 × 152 mm)5.8 mm1,635 mm2Any material, including 3 mm wood and acrylic
5.86 × 8 in (149 × 203 mm)7.7 mm2,180 mm2Any material, including 3 mm wood and acrylic
8.78 × 12 in (223 × 305 mm)12 mm3,271 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Wife Mom Boss SVG files

← Wife Mom Boss in Kaushan Script All 13 Wife Mom Boss designs Wife Mom Boss in Alfa Slab One →