Whiskey barrel SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
An upright barrel with four hoops and a bung hole. The gaps between the staves are fine slots that stop at each hoop, so the hoops are solid bands that hold the whole barrel in one piece.
What is in the file
| Size | 66 × 100 mm (2.58 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 18: 1 outer edge and 17 cut-outs |
| Cut length | 808 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 387 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,338 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | Over 1.5 mm | 205 mm | 140 | Vinyl, card and thin sheet |
| 1.31 × 2 in (33 × 51 mm) | Over 3 mm | 410 mm | 40 | Any material, including 3 mm wood and acrylic |
| 1.97 × 3 in (50 × 76 mm) | Over 4.6 mm | 616 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.62 × 4 in (67 × 102 mm) | Over 6.1 mm | 821 mm | 8 | Any material, including 3 mm wood and acrylic |
| 3.94 × 6 in (100 × 152 mm) | Over 9.1 mm | 1,231 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.25 × 8 in (133 × 203 mm) | Over 12 mm | 1,642 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.87 × 12 in (200 × 305 mm) | Over 18 mm | 2,463 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More whiskey SVG files
-
Whiskey barrel head sign Solid · one piece -
Whiskey hip flask Solid · one piece -
Blank whiskey label Solid · one piece -
Whiskey bottle and glass silhouette Solid · one piece -
Whiskey bottle outline Outline · one piece -
Layered whiskey bottle in three colours Layered · 4 pieces -
Whiskey bottle and glass on a bar Solid · one piece -
Whiskey bottle with a blank label Solid · one piece
← Whiskey decanter with cut diamonds All 14 whiskey designs Whiskey barrel head sign →