Free Welcome to Our Pool SVG

Welcome to Our Pool in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Welcome to Our Pool in Alfa Slab One, as a solid black shape
Welcome to Our Pool in Alfa Slab One. The preview is the SVG file itself.

“Welcome to Our Pool” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 32 mm (3.94 × 1.26 in), scales to any size
Pieces16 separate pieces
Outlines to cut24: 16 outer edges and 8 cut-outs
Cut length783 mm at this size
Narrowest part1.4 mm at this size
Nodes247 curve and line segments

Measured from the file. PNG: 2,000 × 690 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.36 mm199 mm230Too fine for most machines
2 × 0.64 in (51 × 16 mm)0.71 mm398 mm70Fine detail: vinyl and paper only, weed with care
3 × 0.96 in (76 × 24 mm)1.1 mm597 mm30Vinyl, card and thin sheet
4 × 1.28 in (102 × 32 mm)1.4 mm796 mm16Vinyl, card and thin sheet
6 × 1.91 in (152 × 49 mm)2.1 mm1,193 mm5Vinyl, card and thin sheet
8 × 2.55 in (203 × 65 mm)2.8 mm1,591 mm4Vinyl, card and thin sheet
12 × 3.83 in (305 × 97 mm)4.3 mm2,387 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome to Our Pool SVG files

← Welcome to Our Pool in Lilita One All 13 Welcome to Our Pool designs Welcome to Our Pool in Amatic SC →