Free Welcome to Our Home SVG

Welcome to Our Home stencil plate SVG

Welcome to Our Home stencil plate, as a solid black shape
Welcome to Our Home stencil plate. The preview is the SVG file itself.

A rounded plate with “WELCOME TO OUR HOME” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size97 × 100 mm (3.83 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length2,023 mm at this size
Narrowest part1.7 mm at this size
Nodes240 curve and line segments

Measured from the file. PNG: 1,950 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)0.43 mm514 mm100Too fine for most machines
1.95 × 2 in (49 × 51 mm)0.86 mm1,028 mm25Fine detail: vinyl and paper only, weed with care
2.92 × 3 in (74 × 76 mm)1.3 mm1,542 mm9Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)1.7 mm2,055 mm4Vinyl, card and thin sheet
5.84 × 6 in (148 × 152 mm)2.6 mm3,083 mm2Vinyl, card and thin sheet
7.79 × 8 in (198 × 203 mm)3.5 mm4,111 mm1Any material, including 3 mm wood and acrylic
11.69 × 12 in (297 × 305 mm)5.2 mm6,166 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Welcome to Our Home SVG files

← Welcome to Our Home outline lettering All 12 Welcome to Our Home designs Welcome to Our Home with a drop shadow →